用户名 密 码 登 录 忘记密码 免费注册

网站会员中心 | 设为首页 | 加入收藏

 您好，欢迎光临中国轴承行业网         退出登陆

会员中心 | 设为首页 | 加入收藏

协会

统计

国外文献 > 1.轴承 > 4. 设计与分析 > 数值方法

关键词搜索：

  • 1 'Inlet suction', a load support mechanism in non-convergent, pocketed, hydrodynamic bearings
       “入口吸力”，一种用于非收敛、带凹槽的流体动力轴承中的负载支撑机制
  • 2 3-dimensional analysis of dynamic behavior of bearing of Nielsen bridge
       尼尔森桥轴承动态行为的三维分析
  • 3 3-Dimensional analysis of dynamic behavior of bearing of Nielsen bridge
       尼尔森桥轴承动态行为的三维分析
  • 4 A 5-DOF Magnetic Levitation Motor System with Two Similar Hybrid Magnetic Bearings
       带两个相似混合磁轴承的五自由度磁悬浮电机系统
  • 5 A COMBINED LUMPED PARAMETER AND FINITE ELEMENT MODEL OF A SINGLE STAGE GEARBOX FOR BEARING FAULT SIMULATION
       单级齿轮箱的综合 lumped 参数与有限元模型用于轴承故障仿真
  • 6 A Comparative Performance Analysis of Gas Lubricated Cylindrical and Elliptical Journal Bearings
       气体润滑圆柱滚子轴承与椭圆滚子轴承的性能比较分析
  • 7 A comparative performance assessment of hydrostatic thrust bearings operating with electrorheological lubricant
       电液润滑剂运行的静液压推力轴承的比较性能评估
  • 8 A Comparison Between the EN 383 and ASTM D5764 Test Methods for Dowel-Bearing Strength Assessment of Wood: Experimental and Numerical Investigations
       木材销钉承载强度评估中EN 383与ASTM D5764试验方法的比较：实验与数值研究
  • 9 A comparison study on characteristics of five types of hydrodynamic oil bearings for application to hard disk drive spindles
       五种流体动力油润滑轴承在硬盘驱动器主轴应用中的特性比较研究
  • 10 A comparison study on performances of four types of oil lubricated hydrodynamic thrust bearings for hard disk drive spindles
       四种油润滑流体动力推力轴承在硬盘驱动器主轴上的性能比较研究
  • 11 A Comprehensive Model to Compute Roll Gap Profile for a Rolling Mill Including Bearing and Mill Housing Deflections
       用于计算轧机滚动间隙分布的综合模型，包含轴承和轧机壳体的挠曲
  • 12 A computational investigation on the reducing lateral vibration of rotors with rolling-element bearings passing through critical speeds by means of tuning the stiffness of the system supports
       通过调整系统支撑刚度，对带滚子轴承的转子在通过临界转速时的横向振动进行计算研究
  • 13 A Computationally Efficient, Mass Conserving Generalized Short Bearing Formulation for Dynamically Loaded Journal Bearings
       一种计算高效、质量守恒的广义短轴承模型，用于动态载荷滚动轴承
  • 14 A Coupled Euler-Lagrange Model for More Realistic Simulation of Debris Denting in Rolling Element Bearings
       用于更真实模拟滚动元件轴承碎片压痕的耦合欧拉-拉格朗日模型
  • 15 A coupled finite-volume CFD solver for two-dimensional elasto-hydrodynamic lubrication problems with particular application to rolling element bearings
       用于二维弹性流体动力学润滑问题的耦合有限体积CFD求解器，特别适用于滚动元件轴承
  • 16 A crystal plasticity and cohesive element model for rolling contact fatigue of bearing steels
       轴承钢滚动接触疲劳的晶粒塑性与粘结元素模型
  • 17 A Design Method of Thin-Walled and Four-Point Contact Ball Bearings of Industrial Robots
       工业机器人薄壁四点接触球轴承的设计方法
  • 18 A DYNAMIC ANALYSIS OF INNER BEARING BUSH FROM BLADE ADJUSTMENT MECHANISM OF KAPLAN TURBINES
       卡普兰水轮机叶片调节机构中内轴承衬套的动力学分析
  • 19 A FEM based modeling method for analyzing the static performance of aerostatic thrust bearings considering the fluid-structure interaction
       基于有限元的建模方法，用于分析考虑流固耦合效应的静力性能气动推力轴承
  • 20 A Finite Element Model for Static Performance Analysis of Gas Foil Bearings Based on Frictional Contacts
       基于摩擦接触的气体箔轴承静力性能分析有限元模型
    • 共 964 条记录 第 1 页 ¦ 共 49 页 首页 上一页 下一页 尾页  到第  页 跳转

    VIP网员

    联系我们 | 登录注册 | 会员管理 | 网员服务 | 服务信息 | 广告服务 | 高薪聘请 | 法律声明 | 关于我们

    京公网安备 11010202009788    京ICP备2021015424号