用户名 密 码 登 录 忘记密码 免费注册

网站会员中心 | 设为首页 | 加入收藏

 您好，欢迎光临中国轴承行业网         退出登陆

会员中心 | 设为首页 | 加入收藏

协会

统计

国外文献 > 1.轴承 > 8. 系统与应用 > 系统集成

关键词搜索：

  • 1 1-D SIMULATION MODEL OF A PROGRESSIVE FLOW CONTROLLER FOR HYDROSTATIC BEARINGS
       静压轴承用渐进式流量控制器的1-D仿真模型
  • 2 100MM diameter self-contained solid/powder lubricated auxiliary bearing operated at 30,000 rpm
       直径100毫米，自成一体式固体/粉末润滑辅助轴承，转速30,000转/分钟
  • 3 100mm diameter self-obtained solid/powder lubricated auxiliary bearing operated at 30,000 rpm
       直径100毫米、自润滑固体/粉末润滑的辅助轴承，转速30,000转/分钟
  • 4 A 3D-Coil Model for Bearing Current Analysis of Inverter-fed Drives
       用于变频驱动轴承电流分析的3D线圈模型
  • 5 A bearing fault diagnosis method without fault data in new working condition combined dynamic model with deep learning
       基于动态模型与深度学习的无故障数据新工况轴承故障诊断方法
  • 6 A benchmark of measurement approaches to track the natural evolution of spall severity in rolling element bearings
       用于跟踪滚动轴承磨粒严重程度自然演变的测量方法基准
  • 7 A CFD investigation of lubricant flow in deep groove ball bearings
       深沟球轴承中润滑剂流动的CFD研究
  • 8 A Combined Preventive Maintenance Strategy for Bearings to Accomplish the Failure Prevention of Rotating Equipment
       轴承综合预防性维护策略以实现旋转设备的故障预防
  • 9 A Comparative Analysis of Detecting Bearing Fault, Using Infrared Thermography, Vibration Analysis and Air-Borne Sound
       基于红外热成像、振动分析和空中声学的轴承故障检测比较分析
  • 10 A COMPARATIVE STUDY OF A MULTIRECESS HYBRID WORN JOURNAL BEARING SYSTEM OPERATING IN TURBULENT REGIME COMPENSATED WITH DIFFERENT FLOW CONTROL DEVICES
       一种多级混合式轴承系统在湍流工况下运行的比较研究，采用不同流量控制装置进行补偿
  • 11 A Comparative Study of the Effectiveness of Adaptive Filter Algorithms, Spectral Kurtosis and Linear Prediction in Detection of a Naturally Degraded Bearing in a Gearbox
       自适应滤波算法、频谱偏度与线性预测在齿轮箱中检测自然退化轴承效果的比较研究
  • 12 A COMPARATIVE STUDY OF THE VIBRATION AND ACOUSTIC EMISSION TECHNIQUES TO DETECT EARLY STAGE DAMAGE OF ROLLING ELEMENT BEARINGS
       滚动元件轴承早期损伤检测振动与声发射技术的比较研究
  • 13 A Comparative Study of Turning and Stationary Groove Journal Bearings for HDD Spindle Motors Under Transient Contact Conditions
       在瞬态接触条件下，用于硬盘驱动器主轴电机的车削与固定沟槽滚柱轴承的比较研究
  • 14 A comparison of some condition monitoring techniques for the detection of defect in induction motor ball bearings
       感应电机球轴承缺陷检测中几种状态监测技术的比较
  • 15 A Comparison of Turning and Stationary Groove Bearings for Data Storage Equipment Spindle Motors under Transient Contact Conditions
       在瞬态接触条件下，数据存储设备主轴电机用车削轴承与固定沟槽轴承的比较
  • 16 A COMPARISON OF WEAR PROPERTIES OF WATER LUBRICATED NBR AND PTFE SLIDING BEARINGS
       水润滑NBR与PTFE滑动轴承磨损性能的比较
  • 17 A comprehensive dynamic model of double-row spherical roller bearing - Model development and case studies on surface defects, preloads, and radial clearance
       双列球面滚子轴承的综合动态模型——表面缺陷、预载荷与径向间隙的建模与发展及案例研究
  • 18 A comprehensive evaluation of the effect of defect size in rolling element bearings on the statistical features of the vibration signal
       对滚动轴承中缺陷尺寸对振动信号统计特征影响的全面评估
  • 19 A Comprehensive Model for Assessing the Impact of Steel Cleanliness on Bearing Performance
       评估钢材洁净度对轴承性能影响的综合模型
  • 20 A Comprehensive Model for Assessing the Impact of Steel Cleanliness on Bearing Performance
       评估钢材洁净度对轴承性能影响的综合模型
    • 共 1383 条记录 第 1 页 ¦ 共 70 页 首页 上一页 下一页 尾页  到第  页 跳转

    VIP网员

    联系我们 | 登录注册 | 会员管理 | 网员服务 | 服务信息 | 广告服务 | 高薪聘请 | 法律声明 | 关于我们

    京公网安备 11010202009788    京ICP备2021015424号