用户名 密 码 登 录 忘记密码 免费注册

网站会员中心 | 设为首页 | 加入收藏

 您好，欢迎光临中国轴承行业网         退出登陆

会员中心 | 设为首页 | 加入收藏

协会

统计

国外文献 > 1.轴承 > 1. 基础理论与机制 > 摩擦与润滑

关键词搜索：

  • 1 'Severe' wear challenge to 'as-cast' and 'double heat-treated' large-diameter metal-on-metal hip bearings
       对“铸态”和“双热处理”大直径金属对金属髋关节轴承进行“严重”磨损挑战
  • 2 100MM diameter self-contained solid/powder lubricated auxiliary bearing operated at 30,000 rpm
       直径100毫米，自成一体式固体/粉末润滑辅助轴承，转速30,000转/分钟
  • 3 100mm diameter self-obtained solid/powder lubricated auxiliary bearing operated at 30,000 rpm
       直径100毫米、自润滑固体/粉末润滑的辅助轴承，转速30,000转/分钟
  • 4 3D Numerical investigation of pressure field of an orifice compensated hydrostatic bearing
       孔隙补偿静压轴承压力场的三维数值分析
  • 5 A 3D printed biomimetic scaffold for cartilage regeneration with lubrication, load-bearing, and adhesive fixation properties
       一种具有润滑、承重和粘附固定特性的3D打印仿生软骨再生支架
  • 6 A Calculation Method for the Journal Bearing with a Determined Load Based on Response Surface Optimization
       基于响应面优化的确定载荷下轴承载计算方法
  • 7 A CFD investigation of lubricant flow in deep groove ball bearings
       深沟球轴承中润滑剂流动的CFD研究
  • 8 A combined approach to study and model the effect of viscous heating in small porous, self lubricating journal bearings
       结合方法研究和建模小孔隙自润滑滑动轴承中粘性加热的影响
  • 9 A comparative performance assessment of hydrostatic thrust bearings operating with electrorheological lubricant
       电液润滑剂运行的静液压推力轴承的比较性能评估
  • 10 A Comparative Review of the Lubrication of Bearings in Wind Turbines and Spacecraft to Address Wind Turbine Bearing Failures
       风力涡轮机与航天器轴承润滑的比较研究：应对风力涡轮机轴承失效问题
  • 11 A comparative study for lubrication of surface textured porous journal bearing with two different non-Newtonian fluid models
       基于两种不同非牛顿流体模型的表面纹理多孔轴向轴承润滑对比研究
  • 12 A Comparative Study of Turning and Stationary Groove Journal Bearings for HDD Spindle Motors Under Transient Contact Conditions
       在瞬态接触条件下，针对硬盘驱动器主轴电机的车削与固定沟槽滚柱轴承对比研究
  • 13 A comparative study on simulation and experiment of oil-air lubrication unit for high speed bearing
       高速轴承油气润滑装置的仿真与实验对比研究
  • 14 A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles - An additive in porous sliding bearings for a car clutch
       六方氮化硼（h-BN）作为润滑微粒的摩擦学行为比较研究——用于汽车离合器多孔滑动轴承的添加剂
  • 15 A comparative thermal analysis of the static performance of different fixed profile bore plain bearings
       不同固定轮廓轴向轴承静态性能的比较热分析
  • 16 A comparison of methods of modelling the bearing surfaces in an internal combustion engine
       内燃机轴承表面建模方法的比较
  • 17 A Comparison of Turning and Stationary Groove Bearings for Data Storage Equipment Spindle Motors under Transient Contact Conditions
       在瞬态接触条件下，数据存储设备主轴电机用车削轴承与固定沟槽轴承的比较
  • 18 A Computational Approach on Load Carrying Capacity and Position of Load Centre of a Slipper Bearing
       滑动轴承承载能力与载荷中心位置的计算方法
  • 19 A computational estimation of the critical rotational speed for finite hydrodynamically lubricated journal bearings
       有限水动力润滑滚柱轴承临界旋转速度的计算估计
  • 20 A Computational Investigation of the Disk-Housing Impacts of Accelerating Rotors Supported by Hydrodynamic Bearings
       基于流体动力轴承支撑的转子加速对圆盘壳体影响的计算研究
    • 共 1718 条记录 第 1 页 ¦ 共 86 页 首页 上一页 下一页 尾页  到第  页 跳转

    VIP网员

    联系我们 | 登录注册 | 会员管理 | 网员服务 | 服务信息 | 广告服务 | 高薪聘请 | 法律声明 | 关于我们

    京公网安备 11010202009788    京ICP备2021015424号